|
>>Part
Sets - Stator / Rotor
Part sets are available in our standard
42, 48, and 56 frame laminations. Larger and smaller lamination
sizes are also available.
Significant power
can be produced in a relatively small size. Our smallest
(70 mm diameter) present offering has successfully been
used to develop over 3/4 HP for short (1 to 2 minute) duration.
At extended frequency testing over 3 HP has been developed.
Applications include value actuators or as a fail-safe device
to back up hydraulic systems.
Large diameter
laminations allow for the thinnest possible designs at a
given power rating.
400 HZ part sets can be manufactured
for very high speed operation. Typical usage is for military
or aircraft applications, but when utilized with a variable
frequency drive it offers a significant operating speed
range.
|